ONE: Slightly Used Harris Bulldog Baler with only 500 operating hours

Model: BADGER L - 125 - S4 -11/8

Serial Number: 8757

• Hopper Feed opening                   65" x 94"
• Wire Tier                                             Accent 470
• Motor Size                                          125 460V
• Main Cylinder                                   11 in. bore
• Ejector Cylinder                               8 in. bore
• Bale Separation Door                     6 in. bore
• Oil Heater                                           Thermostatic

WIDE MOUTH OPEN END AUTO TIE BALER
ONE: AS-IS Condition MODEL 50 - 42 AUTO-TIE BALER

FEED OPENING 50" X 42"
BALE SIZE 42" X 42" X VARIABLE
WIRE SLOTS 5 WIRE SWING OUT SYSTEM
MAIN CYLINDER 10" BORE
TENSION CYLINDER (DUAL) 4" BORE
MOTOR SIZE 75 H.P. 480 VOLT
CONTROLS ALLEN BRADLEY COMPUTER
CYCLE CONTROLS LIGHT SENSITIVE TYPE
WIRE SYSTEM 100# SPOOL SYSTEM

• Manufacturing Date: 2014
• Serial #: 3220
• H.P.: 200
• Bale Size: 45"W x 31"H x 64"L
• Bale Volume: 51.5 Cubic Feet
• Charge Box Opening: 57" x 105.5"
• Hopper Opening: 86" x 116.5"
• Main Pump: 672
•  
• System Pressure: 3/500 PSI
• Main Ram Face Pressure: 280 PSI
• Ejector Ram Face Pressure: 209 PSI
• Shipping Weight: 57 tons

Capacity:

• Bulk OCC: 22-37
• Solid Waste: 37-63
• Newsprint: 33-44
• Aluminum Cans: 10-30
• Steel Cans: 32-58
• Plastic: 13-31
• Non-Ferrous: 20-50

Bale Weights

• Bulk OCC: 1250-1550 lbs
• Solid Waste: 1820-2340 lbs
• Newsprint: 1375-1750 lbs
• Aluminum Cans: 1000-1200 lbs
•  
• Steel Cans: 1550-2250 lbs
• Plastic: 1250-1650 lbs/
• Non-Ferrous: 1500-2400 lbs

RECONDITIONED/WARRANTED

ONE MODEL HRB 2-S

• -HOPPER OPENING 72 "X 54"
• -FEED OPENING 60" X 44"
• -EST. PROD. RATE 5 TONS PER HR.
• -BALE SIZE 62" X 45" X 30"
• -MOTOR SIZE 50 H.P. 208 VOLT
• -MAIN CYLINDER 8" BORE
• -TOTAL FORCE 75 TONS
• -EJECT CYLINDER 7" BORE
• -TOTAL FORCE 57 TONS
• -RESERVOIR CAPACITY 125 GAL.
• -AUTOMATIC TIER 11 GA.
• -OIL HEATER
• -OIL COOLER
• -MACHINE WEIGHT 30,000 LBS

ONE: USED IBC HORIZONTAL CLOSED DOOR BALER MODEL LD-54-SD

HYDRAULIC
Manifold Hydraulic System
JIC Standard Hydraulics Rated to 3,000 PSI
Reservoir Clean-Out Ports
Main Cylinder Bore 6", Stroke 50", Rod 4"
Door Cylinder Bore 4", Stroke 8", Rod 1 3/4"
System Pressure 2,900 PSI
Total Force 81,995 Lbs.
Platen Pressure 56 PSI
Cycle Time (No Load) 19 Seconds
Reservoir Oil Capacity 120 Gallons

ELECTRICAL
Auto Start Sonic Beam Operated Sensor
Completed Bale Alarm
Power on Beacon (Amber)
Main Motor 30 HP/575 Volt

PERFORMANCE
Bale Size Expanded 54" Wide x 27" High x 45" L
Bale Volume 38 Cubic Feet Expanded (Approximate)
Cycle Time 19 Seconds
Capacity 4,237 Cubic Feet Per Hour (No Load)
 

BALE SIZE & PERFORMANCE 

• BALE SIZE Width x Height 40"x30" (1,118 mm x 762 mm) 
• CAPACITY 12,833cu.ft./hr. (363cu.meter/hr) 
• CYCLE TIME 15 seconds (no load)

MACHINE DIMENSIONS

OVERALL

• Lengh  356" (9,042 mm)
• Width  179' (4,445 mm)
• Height  84' (2,l34mm)

HOPPER OPENING Width x Lengh 42" xû' (1,067 mm x 1,524 mm)

STRUCTURAL

• SHIPPING WEIGHT 25,000 lbs (1r,340 kg)
• SHEAR BLADE T-I ALLOY STEEL
• FLOOR OF BALER & BOTTOM OF PLATEN T-1 PLATE
• WELDED FRAME OF HEAVY RE-ENFORCED CHANNEL & PLATE

HYDRAULIC

SYSTEM PRESSURE 3m PSI (207 bar)
CYLINDERS MAIN 8" bore (26mm)

                             82" stroke (2,083 mm)

                             5.5" rod (14Omm)

                   Tension   (6) 5" bore (6-127mm)

OVERALL FORCE 150,800 tbs (68,zKB kg)

RAM FACE PRESSURE  118 PSI (8.13 bar)

OIL RESERVOIR Capacity 215 gallons  ( 814liters)

FILTRATION  100 mesh suction filter

ELECTRICAL

• MAIN MOTOR 460 volt, @ hz, 3 phase 40 HP (30 Kw)
• CONTROL CIRCUIT l20volts
• SENSOR lnfrared Type, G15 second Adjustable Time Delay
• ENCLOSRE NEMA 12 Rated

ONE: USED KMF Closed Door 3036 Baling System

Feed opening 30" x 50"
Bale size 42" x 30" x 30"
5" main cylinder
2 single door cylinder
10 h.p. motor

• -BOX SIZE:                                          60" WIDE X 30" DEEP X 177" LONG

• -BOX OPENING:                                 58" WIDE X 120" LONG

• -HOPPER LOADING AREA:              70" WIDE X 120" LONG

• -BALE CHAMBER SIDE:                    40" WIDE X 30" DEEP X 60" LONG.  (BALE WILL EXPAND TO SOME EXTENT AFTER EJECTION FROM COMPRESSION CHAMBER)

• -MOTOR SIZE                                     (2) 100 H.P. 480V

• -BALE WEIGHT:                                 1400 TO 1700 POUNDS. (PAPER FIBRE MATERIAL)

• -COMPRESSION RAM:                      16" DIAMETER CYLINDER PISTON, 352 TONS FORCE,

• -EJECTOR RAM:                                 12" DIAMETER CYLINDER ISTON, 198 TONS FORCE,

• -STRAPPING UNIT:                            HYDRAULICALLY OPERATED AUTOMATIC U.S. STEEL ROUND STEEL STRAPPING DEVICE USING   AWG #11 SUPER HI-TEN WIRE.

• -SHIPPING WEIGHT                          APPROXIMATELY 97,000 POUNDS TOTAL

Model 60
10HP
600 Volt

Baler

1. Model NF-4560L-1050


2. Serial Number 9438512


3. Main Cylinder 10 Bore


4. Motor Size 40 H.P. 460 Volts


5. Feed opening 45" x 60"

Steel Belt Infeed System

1. Belt width 60"


2. Lower horizontal 12"


3. Upper Horizontal 3"


4. Motor Size 5 HP 460 Volts



 
5.  

Total System Sell price As is
Total System Sell Price Reconditioned 90 Parts warranty

Model 160
10 HP
208 Volt

Year 2007, Discharge Right Hand, 150 HP, Wire Tier Accent 11 ga.

Machine is disassembled and ready for immediate loading with the main cylinder removed. The Main cylinder is rebuilt and never placed in production. Machine wear liners are in fair condition. Minor structural damage to rear yoke cylinder support As Is Price

MACHINE SPECIFICATIONS



SPECIFICATIONS

DRAWING

• 100-HP-MOTOR
• 12"-MAIN CYCLINDER RECENTLY RE-PACKED-2015
• 9"-EJECTOR CYCLINDER
• 6"-BALE RELEASE CYCLINDER RECENTLY RE-PACKED-2016
• 3"-TRAMPLER CYCLINDER- RECENTLY RE-PACKED-2016
• FLOOR- RELINED -2016
• ACCENT 470 Wire Tier-2013
• Allen Bradley-PLC-2013
• NEW HYDRAULIC PUMPS-2015
• MANY NEW PARTS, PUMPS, BOLTS, FILTERS. KNIVES.

• Feed opening 44" x 72
• Main Cylinder Size 8" bore
• Bale Size 42" x 42" x Var
• Wire Tier (5) wire Tie
• Motor Size 40 HP 480v

Used Harris Badger 2-Ram Baler model L125S-4-11/8 automatic two-ram baling press with only 900 operating hours. This baler features a 65 in. x 94 in. hopper opening, a 125 HP motor, bale separation door, non-ferrous liners, a 46 in. wide x 31 in. high x 61 in. long bale size, an 11.5 second cycle time (dry), and pushes 18,700 cubic feet per hour. Additionally, the baler has an 11” bore main cylinder, an 8” bore ejector cylinder, a 6” bore bale separation door, an automatic wire tie, and produces bales that meet export bale size. To review further details please open the specification sheet to the left.

Specs

ONE - MODEL MB-3-6-FER-EV

Ameri-Shred High Grades Fibers / Container Sorting System

- Estimated high-grade fiber throughput of 10 TPH and container sort 3 TPH
- Infeed slider bed 36" wide x 30' long 3 hp.
- Metering drum 36" wide, 3 hp. drive adjustable height
- Sort conveyor 36" wide x 40' long 3 hp. drive
- Support Mezzanine 7' tall x 8' wide (4) drop chutes
- Electrical Control Panel with PLC and variable speed drives

Green Machine - Used - Single Stream Recycling Sorting System

Green Machine is offering a used single stream recycling sorting system that includes a chain-edge steel belt system in-feed conveyor, a 76' long 11' tall sorting mezzanine system, a 48" wide 76' long sorting conveyor, 14 sorting stations accompanied with drop chutes, (2) 40 yard power bunkers, a 48" wide reversing transfer conveyor, and an Allen Bradley Control Panel System.  The system will be shipped out of Johnstown, NY.

Equipment:

1.  48" wide infeed system with 20' lower horizontal with 6" pitch Steel Belt
2. 48" wide HD sort conveyor 76' long
3. Item Three: Sorting Mezzanine System 76' long 11" deck height (14) drop chutes
4. Item Four (2) 40 yard power bunkers
5. Item Five 48" wide reversing transfer conveyor
6. Item Six: Allen Bradley control panel system
7. Bunker

System Layout

Davco Corporation - Idler Conveyor

Conveyor Specifications:

• Length: 17'-0"
• Width: 24"
• Motor HP: 3

Additional Information:

• Needs a belt
• Built and shipped as one section

Belt Type                             6" pitch roller belt style combo belt with 330# belting
Belt Width                           72"
Lower horizontal                   31'
Incline                                 27'
Upper horizontal          7' 10" with Nose Over    
Motor size                          10 hp gear reduced drive

Length: 58"-6'
Width: 60"
Number of sections: 5
Motor HP: 5 Ratio: 86.41:1
Needs Belt: Combo belt needs new rollers

Length: 28"-3"
Width: 60"
Cleats 3" alternating Patern
Number of sections: 1
Motor HP: 3 Ratio: 23.11:1
Needs Belt: No Other: Needs idler bearings on one side

Length: 47"-0"
Width: 24"
Number of sections: 4
Motor HP: 3 Ratio: 23.11:1
Needs Belt: Yes

8in pulleys
5ft wide belt
12in frame height
9ft overall length
5 HP Motor
Reducer ratio 30.89:1
Belt Good condition 220#

• Unit originally installed to separate light fraction from crushed glass
• System is designed to separate heavy fraction material from light - usefull in many recycling applications
• Good operating condition

1. Suitable for all 2-ram balers
2. No need for ties - meaning lower cost and more production
3. Direct wrapping from the bale chamber - meaning clean process, no litter
4. Each bale securely and durably wrapped for transport and storage
5. Fully automatic to save labour costs
6. Suitable for all materials such as RDF, SRF, MSW, recyclables
7. Makes it possible to bale and wrap challenging materials like wood chips and fibres
8. Bales and stretch wraps sensitive materials as well, without any damage of wires or ties.

Used Nihot Air Separator model SDS-650i Semi-Mobile Windshifter. This air separator efficiently separates light fractions from heavy using varying air densities and utilizes re-circulated air. The system is rated to run up to 15 TPH of 0-150 mm fraction sizes. Flexible control parameters and easy integration allows this system to handle a wide variety of materials including C&I, C&D, MSW, ASR, WEEE, single stream, dual stream, and more

Mixed Waste Processing System – Ownership and building use has changed at this Virginia site requiring the immediate removal of this equipment. It’s currently under power and available to inspect. This system processes residential, commercial waste and single stream recycling material. The entire system is available less the two balers.  A variety of well-known manufactures were utilized in this system design. No empirical data exists as to this systems throughput but what is known is that the system has seen little or no use. Please contact us to ask any questions or schedule an appointment to inspect this system. 

66" wide S+S Optical PET Sorter w Accelerator

Green Machine’s reconditioned Double Deck OCC Screen features an eight-shaft primary deck and six-shaft secondary deck with a spinning steel disc array system. The total screening area is 300 ft2 with overall dimensions of 47’ 9 ¼” in length and 8’ 4” in width. The screen is powered by (2) 5 HP; 3 phase/60 hz; 184 TC; TEFC variable brake motors that run up to 1725 RPM. This screen effectively separates large bulky cardboard from MSW streams, C&D streams, co-mingled single streams, etc…and can be optimized to run high tonnages or slowed down to produce an ultra-clean cardboard end product. The system is rated to run up to 14 TPH of material. Leg supports for the system are not included, but can be quoted separately.

Drawing 

Chain Flail Fluffer/Conditioner (1)
20hp motors.
Hydraulic diverter.
Feed opening 60" x 60".
Discharge 42" x 60"

Drawing

In running condition

Dual Disc Swing
Out Fluffer/Conditioner (2) 10hp motors.
Manual swing out. Chamber opening 42" x 72"

More Information
Drawing
 

Single Disc Swing Out Fluffer/Conditioner
10hp motor.
Manual swing out.
Chamber opening 30" x 50"

More Information